A couple of years ago I listened to a Lex Fridman podcast with a researcher at the MIT Media Lab. I don't know the status of it, but the researcher spoke about how people in developing countries were experimenting with using local resources as 3D printer feedstock - things like ground-up sea shells - as a way of using local supply lines.
One of the most interesting things he said was that the current waste from 3D printing (and other technology) is really a sign of technical immaturity; nature repurposes everything - there is no trash in an ecosystem, only food for something else. Maybe we'll eventually learn to build infrastructure like that.
I'm so glad that fad is over. My mother worked as a theatre artisan before retirement and it was, among other things, fumes from curing epoxy that caused numerous health issues down the line.
I am curious about the down-the-line effects of fumes from printing PLA and PETG. Reddit posts suggest no ill effects, but it hasn’t been long enough in the hobbyist world.
My printer is near a window so I just added an exhaust duct to the window, in the past when it wasn't close to a window I ran that duct through some filters (charcoal, furnace filter stuff) and left the end near an additional air purifier i had in the space.
Isn’t plastic nearly free as a raw material as a by product of fossil fuel production? I was always told it’s the opposite, plastic bags are better for the environment if disposed of properly because they’re so light weight to transport, didn’t need to be farmed, and companies basically give away the raw material because it would be more expensive to dispose of. A cotton bag needs to be reused upwards 1000x to be less impactful, or was I bamboozled?
Not when they are properly used as a fossil fuel source. As a fossil fuel source that just happened to also make itself useful in other ways on the voyage from mine to smokestack. As long as we still burn coal for electricity and/or heat it's just stupid to bury plastics (or, worse, let it slowly decay unburied)
It wouldn’t be so bad if you buried it and it stayed buried it, but whatever disposal technology you use it doesn’t work if the plastic is never properly disposed of. Even if people are really careful, for instance, some single use plastics are going to blow away in the wind. Something shoddily made in the bottom of a pond is going to come apart and shed plastics, etc.
> Isn’t plastic nearly free as a raw material as a by product of fossil fuel production?
Yes and no. Oil is cracked down for lots of different things, but one of the things that people are really aiming for is ethane which can be used to make industrial ethanol, and a lot of plastics.
What you end up with to get there is lots of propane and butane, which is used as a fuel gas, but most of that ends up going up the flare stack because there's so much of it. We won't stop doing this while we still use plastics and fertiliser.
You need very clean propane or butane for things like cooking stoves, but you can run car engines on it just fine because they're so much less picky, and the exhaust gases are far cleaner than engines run on heavier fractions like oh maybe octane. This is why things like warehouse forklifts run on gas instead of diesel or petrol - you don't die if you breathe in the fumes, because there's no unburnt fuel or carbon monoxide, because it runs as lean as a vegan's dog.
>What you end up with to get there is lots of propane and butane, which is used as a fuel gas, but most of that ends up going up the flare stack because there's so much of it. We won't stop doing this while we still use plastics and fertiliser.
The amount of gas flared globally adds up to little over 1% of global energy production. I know that doesn't sound like much but we're talking like terawatts. It truly is a mind boggling amount of energy that gets wasted because we simply can't get it to users cheap enough.
If only all (or almost all) of it was flared! Methane is a much more potent greenhouse gas than CO2, and unfortunately there is still a lot of it escaping from oil installations unflared (https://www.iea.org/data-and-statistics/charts/potential-emi...).
> because we simply can't get it to users cheap enough.
Or we can't get it clean enough to use as say cooking gas or aerosol propellant.
Stick it in cars, they'll burn any old shite and emit water and carbon dioxide - two terrible greenhouse gases, for sure, but you'll extract useful work from it instead of literally just heating the atmosphere for the fun of it.
It also burns quite well. If are in a location that burns trash in waste-to-energy plants you can get a decent amount of that energy back by throwing it away
Why use glue at all, he should have done this using a 'stained glass' method. Build some kind of a frame for each area of color and then melt the filimant into it.
Do nothing: 10 pounds of filament poop has go to the landfill.
Do this thing: 10 pounds of filament poop still exists, + 8 pounds of glue sticks (which is basically a thermoplastic) used, to create something that's eventually going to end up in a landfill.
Are you being deliberately obtuse?
Recycling or reuse is not as useful as just not creating waste in the first place.
Maybe it looks more amazing in person than in pictures. If not, and the point is a message about waste, then the 80% increase could be cast as part of the message.
Let’s say every month the artist repurposes the last pile of plastic with more glue. At the end of one year, the 10lbs would turn into 1100lbs. At the end of two years the original 10lbs would have turned into 1.3 million lbs of plastic waste. Surely that would frame a very powerful message about plastic waste and green washing misleading public policy.
They do make biodegradable hot glue [1] but it's still not perfect. It's biodegradable and certified compostable under industrial conditions but it still has a polymer base. It's also not ideal for projects that are always in UV light.
Using the prints themselves as glue rather than buying glue for them would make this a more interesting form of recycling.
I wonder if you could make a large hand-driven low-resolution 3d printer which, rather than running on filament, had a hopper that you fill with failed prints. Really just a giant hot glue gun.
It's really annoying to me that shredders and filament makers are so expensive. I probably generate less waste than average from my printer, but it still pains me to have to just throw it away because I can't do anything productive with it
A filament extruder is essentially an injection molding extruder head without the press and mold - it's pretty advanced technology that requires integrating thermal design, mechanical components, and precise electronic monitoring and control. To get anything close to consistent output you're probably going to need a lot of special cutting and extrusion screws and probably some kind of additional pressurization system, and then the user still has to be disciplined about sorting and cleaning their plastics to get a probably mediocre output. Something like: https://www.instructables.com/Recycled-PLA-Sheets-From-3D-Pr... might be a more practical recycling paradigm for 3D printer waste.
The only comforting thing to me about the waste (apart from the fact that our personal 3d printer waste is a margin of error compared to industrial waste so honestly, just don’t worry about it), is that at least PLA is biodegradable.
It is likely a fraction of a fraction of an already small fraction. Textiles, tires and food packaging are the biggest contributors. It has yet to be proven that microplastics are directly linked to any harm, it is mostly unknown.
If you care about that kind of stuff the best thing you could do is stop driving.
Interesting. I will do more research on this, thanks. But at the end of the day, even though it's tough for us to see the PLA poop, etc from our prints (I still generally don't like it), my point is that hobbyist plastic waste is basically negligible and making nearly zero difference.
I don't want people to see plastic waste from 3D printing and be discouraged to try it out as a hobby. I just got my first 3d printer 6 months ago (and I did all this biodegradable research mostly so my wife would feel comfortable with it). But the benefits of rewiring your brain in a manufacturing mindset, having the ability to create things, solve custom problems, etc, far outweigh the negligible (in the grand scheme of things) amount of waste compared to all the other plastic shit (toys, etc) the masses buy on amazon. That was my main point.
But it's good to know that it could still take 80 years, and is not as quickly biodegradable as originally thought.
I took a quick look because that sounds odd. They've made a mess of the article's image sizing - only 270px wide if the viewport is <768px. (That top image is 1024px wide on desktop.) There's so much wrong with that decision, regardless of the huge difference between 270 and 768, e.g. apparently not being aware of hardware pixel density on smartphones.
It would be great to be able to create "art" and add something that degrades it.
One of the most interesting things he said was that the current waste from 3D printing (and other technology) is really a sign of technical immaturity; nature repurposes everything - there is no trash in an ecosystem, only food for something else. Maybe we'll eventually learn to build infrastructure like that.
Cool project, but that ratio seems very ineffective. Especially since there is a realistic chance this ends up in landfill within some decades anyway.
95+% of the carbon footprint of plastics comes from production and manufacturing.
Yes and no. Oil is cracked down for lots of different things, but one of the things that people are really aiming for is ethane which can be used to make industrial ethanol, and a lot of plastics.
What you end up with to get there is lots of propane and butane, which is used as a fuel gas, but most of that ends up going up the flare stack because there's so much of it. We won't stop doing this while we still use plastics and fertiliser.
You need very clean propane or butane for things like cooking stoves, but you can run car engines on it just fine because they're so much less picky, and the exhaust gases are far cleaner than engines run on heavier fractions like oh maybe octane. This is why things like warehouse forklifts run on gas instead of diesel or petrol - you don't die if you breathe in the fumes, because there's no unburnt fuel or carbon monoxide, because it runs as lean as a vegan's dog.
The amount of gas flared globally adds up to little over 1% of global energy production. I know that doesn't sound like much but we're talking like terawatts. It truly is a mind boggling amount of energy that gets wasted because we simply can't get it to users cheap enough.
Or we can't get it clean enough to use as say cooking gas or aerosol propellant.
Stick it in cars, they'll burn any old shite and emit water and carbon dioxide - two terrible greenhouse gases, for sure, but you'll extract useful work from it instead of literally just heating the atmosphere for the fun of it.
I think you're full of shit.
Do this thing: 10 pounds of filament poop still exists, + 8 pounds of glue sticks (which is basically a thermoplastic) used, to create something that's eventually going to end up in a landfill.
Are you being deliberately obtuse?
Recycling or reuse is not as useful as just not creating waste in the first place.
Let’s say every month the artist repurposes the last pile of plastic with more glue. At the end of one year, the 10lbs would turn into 1100lbs. At the end of two years the original 10lbs would have turned into 1.3 million lbs of plastic waste. Surely that would frame a very powerful message about plastic waste and green washing misleading public policy.
https://www.poweradhesives.com/adhesives/tecbond-214b/
Otherwise the author would have started a different project and likely would have consumed more material.
Sibling comments focus on the end result and that it might end up in trash - but that was always the plan.
I wonder if you could make a large hand-driven low-resolution 3d printer which, rather than running on filament, had a hopper that you fill with failed prints. Really just a giant hot glue gun.
barf
vomit even.
But once it's fragmented, it's rapidly degraded. So it doesn't contribute to persistent microplastics.
It also does not take 80 years in normal environmnets.
If you care about that kind of stuff the best thing you could do is stop driving.
I don't want people to see plastic waste from 3D printing and be discouraged to try it out as a hobby. I just got my first 3d printer 6 months ago (and I did all this biodegradable research mostly so my wife would feel comfortable with it). But the benefits of rewiring your brain in a manufacturing mindset, having the ability to create things, solve custom problems, etc, far outweigh the negligible (in the grand scheme of things) amount of waste compared to all the other plastic shit (toys, etc) the masses buy on amazon. That was my main point.
But it's good to know that it could still take 80 years, and is not as quickly biodegradable as originally thought.