This is amazing.. ive been working with custom CUDA kernels and https://crates.io/crates/cudarc for a long time, and this honestly looks like it could be a near drop-in replacement.
im especially curious how build times would compare? Most Rust CUDA crates obv rely on calling CMake or nvcc, which can make compilation painfully slow. coincidentally, just last week i was profiling build times and found that tools like sccache can dramatically reduce rebuild times by caching artifacts - but you still end up paying for expensive custom nvcc invocations (e.g. candle by hugging face calls custom nvcc command in their kernel compilation): https://arpadvoros.com/posts/2026/05/05/speeding-up-rust-whi...
> Most Rust CUDA crates obv rely on calling CMake or nvcc, which can make compilation painfully slow.
I anecdotally haven't hit this; see the `cuda_setup` crate I made to handle the build scripts; it is a simple `build.rs` which only recompiles if the file changes, and it's a tiny compile time (compared to the rust CPU-side code)
perhaps not drop-in, but all my workflows with cudarc have always been "i make cuda kernel, i use cudarc for ffi to said kernels, i call via rust" - which for this case is pretty analogous
briefly looking at the repo, looks like the main workflow is using rustc-codegen-cuda to convert rust -> MIR -> pliron IR -> LLVM IR -> PTX, which is embedded in the host binary, where then cuda-core loads embedded PTX at runtime onto the GPU
but, if you arent directly making cuda kernels and just want cudarc for either calling existing kernels or other cuda driver api access then cudarc is lighter-weight option? or just use one of the sub-crates in this repo like cuda-core for those apis
I am observing the same from the article... is it heavily inspired by Cudarc, i.e. is this intentional, or are we reading too much into this, given Cudarc is a light abstraction over the CUDA api?
I'm quite interested in how they dealt with Rust's memory model, which might not neatly map to CUDA's semantics. Curious what the differences are compared to CUDA C++, and if the Rust's type system can actually bring more safety to CUDA (I do think writing GPU kernels is inherently unsafe, it's just too hard to create a safe language because of how the hardware works, and because of the fact that you're hyper-optimizing all the time)
1. use-after-free, drop semantics vs manual cudaFree
2. kernel args enforced using `cuda_launch!` whereas CPP void* args is just an array of pointers, validating count only
3. alias mutable writes. e.g. CPP can have more than one thread writing out[i] with same i and this will compile. but DisjointSlice<T> with ThreadIndex doesnt have any public constructor (see: https://github.com/NVlabs/cuda-oxide/blob/2a03dfd9d5f3ecba52...) and only using API of `index_1d` `index_2d` and `index_2d_runtime`
This is explained in some detail in the docs. There is a safe layer, a mostly safe layer, and an unsafe layer. Some clunkiness is needed for safe-yet-parallel work that they couldn’t easily fit into the Rust Send/Sync model.
I think it depends on the objective. My pattern-matching brain says there will be interest in addressing this.
From my perspective of someone who writes applications in Rust and sometimes wants to use GPU compute in these applications: I don't care. If we can leverage the memory model or ownership model in a low-friction way, that's fine. If it makes it a high friction experience, I would prefer not to do it that way.
The baseline is IMO how Cudarc currently does it. I don't think there is much memory management involved; it's just imperative syntax wrapping FFI, and some lines in the build script to invoke nvcc if the kernels change.
I wonder what it means for Slang[0]. Presumably the point is that people want to do GPU programming with a more modern language. But now you can just use Rust...
There's library code in rust that manages GPU memory and schedules pipelines and use a slang reflection to ensure memory layouts between rust and shaders match.
> (em dash) no DSLs, no foreign language bindings, just Rust.
Official CUDA port and they couldn't even bother with the introductory paragraph.
Okay, I'll try to ignore it and read the docs. Hey a custom IR, this sounds interesti-
> MLIR’s implementation, however, is C++ with a side of TableGen, a build system that requires you to compile all of LLVM, and debugging sessions that make you question your career choices.
that ship has long sailed, "it no longer matters"
saying a codebase, an article was written with AI doesn't mean much, it could be good, it could be bad. folks often say it to generate outrage, but that means nothing. is the codebase great, good, bad, terrible? that's the only thing that matters.
Even as someone who uses a lot of AI, if you can't be bothered to at least give it a prompt like "Go through the documentation and comments in detail and remove any obvious AI shibboleths like emdashes, it's not x it's y, rule-of-three, 'delve', excessive grandiosity and flourishes, boldness, bullet points, etc", you should receive a brisk kick in the rear.
Not really but they jump right out at you after a few minutes chatting with it. I also asked the AI and it was pretty subjectively accurate, especially if you force it to cross reference with web searches and especially google's ngram corpus (you can readily see that 'delve' and some of the other rhetorical constructs are quite uncommon in human speech)
Might be the only thing that matters to you. And, perhaps, the only thing that matters in a functional sense. But, whether it’s human-coded/written or not matters deeply to some.
if they didnt use AI for their webpage people would say "why doesnt NVIDIA write its website and documentation with AI? don't they believe their own story about AI factories and employees managing thousands of agents doing the work for them?"
this is exactly on brand dog-fooding I would expect from an AI hyper
That's a lost battle even in the Rust community: Firefox's oxidation, Ferrous Systems, Redox, OxidOS, OxCaml (OCaml extensions partly inspired by Rust)… and every crate referencing oxidation in its name.
The quoted writing is AI slop, and OP is reacting to the fact that they did not write even the introductory text themselves (or at least bother to edit out clear AI/slop indicators)
Everyone on Orange Reddit apparently. This is the new meta, the LLM shallow dismissal. It’s quickly overtaking complaining about the css of the blog post they didn’t read.
> A GPU kernel runs thousands of threads that all see the same memory at the same time. On a CPU, Rust prevents data races through ownership and borrowing – one mutable reference, no aliases, enforced at compile time. On a GPU, you have 2048 threads per SM, all launched from the same function, all pointing at the same output buffer. The borrow checker was not designed for this.
> cuda-oxide solves the problem in layers. The common case – one thread writes one element – is safe by construction, no unsafe required. The uncommon cases – shared memory, warp shuffles, hardware intrinsics – require unsafe with documented contracts. And the frontier cases – TMA, tensor cores, cluster-level communication – are fully manual, matching the complexity of the hardware they control.
That's.. not really Rusty. In Rust, we create new safe abstractions when the existing ones don't quite map to the problem at hand. See for example what's done in Rust for Linux
If it's not safe.. what's the point of Rust?
(it's okay to offer unsafe APIs for people that need to squeeze the last bit of performance, but this shouldn't be the baseline)
I compare this with userspace libs for APIs like io_uring and vulkan. designing safe APIs for them stuff is kind of hard (there's even some unsound attempts)
agree not related to the rust to cuda compiler, you are right!
But I have to say worth to look at upcoming new stuff, as this is kind a wow rust on good old CUDA.
Does anyone know if this will let you share structs between host and device? That is the big thing missing so far with existing rust/CUDA workflows. (Plus the serialization/bytes barrier between them)
One thing I’ve been wary about with Rust for CUDA is the bit of overhead that Rust adds that is usually negligible but might matter here, like bounds checks on arrays. Could it cause additional registers to get used, lowering the concurrency of a kernel?
Hell yea! I have been doing it with Cudarc (Kernels) and FFI (cuFFT). Using manual [de]serialization between byte arrays and rust data structs. I hope this makes it lower friction!
So, we have stainless, which means Linux code that never rusted. Now we need someone to make phosphorus so that we can turn rusty code into old iron. Then GPL fans can run Rust boxes, Stainless machines, or future proofed iron work horses.
All software can come on three editions. Stainless drivers that were never rusty, oxidized drivers that used Rust on existing code, and Iron editions which is where someone converted the Rust back to C using the new phosphoric tool...
Diversity can be our strength.
Making Iron C/c++ code can be called acid washing if it was rusted.
Oh lord. If this is the trend, I probably can't avoid improving my Rust language knowledge in the long term. I hate reading Rust so much right now. I guess I just have to get over that hump.
Learning Rust is more alike to learning a new programming paradigm (e.g. functional when you only know imperative) than a new language with different syntax only. If you ignore that and try to jump directly to writing code more or less the same way as you used to, it will be painful. So take it slow and follow along with The Book (https://doc.rust-lang.org/book/). It all makes sense eventually and is very much worth it!
There is actually work on adding autodiff to Rust, maybe not really first class citizen, but at least build in: https://doc.rust-lang.org/std/autodiff/index.html (it is still at a pre-RFC stage so it is not something that soon will be added)
Incredible, I have never heard of std::autodiff before. Isn't it rare for a programming language to provide AD within the standard library? Even Julia doesn't have it built-in, I wouldn't expect Rust out of all languages to experiment it in std.
It makes use of https://github.com/EnzymeAD/enzyme which is an LLVM plugin and since Rust also uses LLVM in its backend, we can enable this plugin in our Rust toolchain when autodiff is enabled. So, it is a bit of compiler black magic rather than a direct implementation in the standard library.
This is a bit good for Rust if you want to use the language with CUDA. The problem is, it still doesn't really move the needle if you really don't like running closed source drivers and runtime binaries and care about open source.
Continuing from this discussion [0], this only makes it a Rust or a CUDA problem rather than a Python, CUDA and a PyTorch one if there bug in one of them.
Yet at the end of the day, it still uses Nvidia's closed source CUDA compiler 'nvcc' which they will never open source. A least Mojo promises to open source their own compiler which compiles to different accelerators with multiple backend support.
The claim is that people are running CUDA on Windows for business analytics and data science? This feels less likely an accurate picture and more likely any mass data processing is already happening on Linux K8s clusters.
The K8s clusters do exist, but I've never met anyone in my life that develops their Jupyter notebooks from their business' Kubernetes setup. Most of them don't even use WSL, to my chagrin (and to their detriment).
> it still doesn't really move the needle if you really don't like running closed source drivers and runtime binaries
Those people probably did not buy an Nvidia GPU for themselves. It should be common knowledge that the "Open" Nvidia drivers still run gigantic firmware blobs to dispatch complex workloads. And Nouveau is close to useless for GPGPU compute.
Why do we bother with programming languages today? Why not have the LLMs just write assembly code and skip the human readable part? We are not reviewing it anymore anyway.
1) Higher level code is easier for LLMs to review and iterate upon. The more the intent is clear from the code, the easier it is for humans and LLMs to work with.
2) LLMs get stuck or fail to solve a problem sometimes. It is preferable to have artifacts that humans can grok without the massive extra effort of parsing out assembly code.
3) Assembly code varies massively across targets. We want provable, deterministic transformation from the intent (specified in a higher level language) to the target assembly language. LLMs can't reliably output many artifacts for different platforms that behave the same.
4) Hopefully, we are still reviewing the code output by LLMs to some extent.
> 1) Higher level code is easier for LLMs to review and iterate upon. The more the intent is clear from the code, the easier it is for humans and LLMs to work with.
The counter-argument, and one that matches my experience is working at a lower level is actually beneficial for LLMs since they can see the whole picture and don’t have to guess at abstractions.
1.5) Having a compiler in the loop that does things like enforcing type constraints (and in the case if Rust in particular, therefore memory safety guarantees) is really useful both for humans and LLMs.
Feel free to post a project of yours where you gave a bunch of prompts to an LLM and it produced a working application written in assembly without you having to check for anything
I get what you mean but I think if anything AI pairs extremely well with strongly typed languages that are at times cumbersome for humans, but decrease the latency at which AI can get feedback on its code. In my (very) limited experience Rust is an excellent target for AI codegen.
This is a Rust to CUDA converter so I guess it is for codes where the programmer wants it to function properly (Rust) and have good performance (CUDA).
It’s just a matter of different workflows for different users and application.
Programming languages are tools for thinking. It's not clear that assembly code has the right abstractions to encourage the kind of thinking that programming large systems requires. After all, human intelligence found assembly insufficient and went on to invent better languages for thinking, why should artificial intelligence, trained on human intelligence, be any different? Maybe AI in the future will have its own languages for thinking, but assembly is likely not that.
I mean, AI is not good at writing x86-64 assembly code. Last time I tried (with both Claude and ChatGPT), the AI failed to even create basic programs other than Hello World.
im especially curious how build times would compare? Most Rust CUDA crates obv rely on calling CMake or nvcc, which can make compilation painfully slow. coincidentally, just last week i was profiling build times and found that tools like sccache can dramatically reduce rebuild times by caching artifacts - but you still end up paying for expensive custom nvcc invocations (e.g. candle by hugging face calls custom nvcc command in their kernel compilation): https://arpadvoros.com/posts/2026/05/05/speeding-up-rust-whi...
> Most Rust CUDA crates obv rely on calling CMake or nvcc, which can make compilation painfully slow.
I anecdotally haven't hit this; see the `cuda_setup` crate I made to handle the build scripts; it is a simple `build.rs` which only recompiles if the file changes, and it's a tiny compile time (compared to the rust CPU-side code)
That would be amazing, but probably not imo complementarily so.
I am curious what distinguished cuda-oxide. Beyond it being totally under nv control.
briefly looking at the repo, looks like the main workflow is using rustc-codegen-cuda to convert rust -> MIR -> pliron IR -> LLVM IR -> PTX, which is embedded in the host binary, where then cuda-core loads embedded PTX at runtime onto the GPU
but, if you arent directly making cuda kernels and just want cudarc for either calling existing kernels or other cuda driver api access then cudarc is lighter-weight option? or just use one of the sub-crates in this repo like cuda-core for those apis
1. use-after-free, drop semantics vs manual cudaFree
2. kernel args enforced using `cuda_launch!` whereas CPP void* args is just an array of pointers, validating count only
3. alias mutable writes. e.g. CPP can have more than one thread writing out[i] with same i and this will compile. but DisjointSlice<T> with ThreadIndex doesnt have any public constructor (see: https://github.com/NVlabs/cuda-oxide/blob/2a03dfd9d5f3ecba52...) and only using API of `index_1d` `index_2d` and `index_2d_runtime`
4. im pretty sure you can cuda memcpy a std::string and literally any other POD and "corrupt" its state making it unusable. here it ONLY accepts DisjointSlice<T>, scalars, and closures (https://nvlabs.github.io/cuda-oxide/gpu-programming/memory-a...)
but most of the nitty gritty is in these sections
* https://nvlabs.github.io/cuda-oxide/gpu-safety/the-safety-mo...
* https://nvlabs.github.io/cuda-oxide/gpu-programming/memory-a...
edit: that being said, not like this catch everything, just looks to give much more guardrails against UB with raw .cu files
From my perspective of someone who writes applications in Rust and sometimes wants to use GPU compute in these applications: I don't care. If we can leverage the memory model or ownership model in a low-friction way, that's fine. If it makes it a high friction experience, I would prefer not to do it that way.
The baseline is IMO how Cudarc currently does it. I don't think there is much memory management involved; it's just imperative syntax wrapping FFI, and some lines in the build script to invoke nvcc if the kernels change.
(Disclaimer: I like Slang a lot.)
[0]: https://shader-slang.org/
Also shading languages are more user friendly given their features.
Finally NVida already has Slang in production and those folks aren't going to rewrite shader pipelines into Rust.
There's library code in rust that manages GPU memory and schedules pipelines and use a slang reflection to ensure memory layouts between rust and shaders match.
Oh and it supports metal/vulkan/dx12
Official CUDA port and they couldn't even bother with the introductory paragraph.
Okay, I'll try to ignore it and read the docs. Hey a custom IR, this sounds interesti-
> MLIR’s implementation, however, is C++ with a side of TableGen, a build system that requires you to compile all of LLVM, and debugging sessions that make you question your career choices.
I can't take this industry seriously anymore.
https://en.wikipedia.org/wiki/Wikipedia:Signs_of_AI_writing
this is exactly on brand dog-fooding I would expect from an AI hyper
> A GPU kernel runs thousands of threads that all see the same memory at the same time. On a CPU, Rust prevents data races through ownership and borrowing – one mutable reference, no aliases, enforced at compile time. On a GPU, you have 2048 threads per SM, all launched from the same function, all pointing at the same output buffer. The borrow checker was not designed for this.
> cuda-oxide solves the problem in layers. The common case – one thread writes one element – is safe by construction, no unsafe required. The uncommon cases – shared memory, warp shuffles, hardware intrinsics – require unsafe with documented contracts. And the frontier cases – TMA, tensor cores, cluster-level communication – are fully manual, matching the complexity of the hardware they control.
That's.. not really Rusty. In Rust, we create new safe abstractions when the existing ones don't quite map to the problem at hand. See for example what's done in Rust for Linux
If it's not safe.. what's the point of Rust?
(it's okay to offer unsafe APIs for people that need to squeeze the last bit of performance, but this shouldn't be the baseline)
I compare this with userspace libs for APIs like io_uring and vulkan. designing safe APIs for them stuff is kind of hard (there's even some unsound attempts)
Does anyone have more details on NVIDIAs use of Spark/Ada?
All I can find is what's listed below:
https://www.adacore.com/case-studies/nvidia-adoption-of-spar...
https://www.youtube.com/watch?v=2YoPoNx3L5E
All software can come on three editions. Stainless drivers that were never rusty, oxidized drivers that used Rust on existing code, and Iron editions which is where someone converted the Rust back to C using the new phosphoric tool...
Diversity can be our strength.
Making Iron C/c++ code can be called acid washing if it was rusted.
> Then GPL fans can
Checks out
https://rust-lang.github.io/rust-project-goals/2024h2/Rust-f...
note that it also discusses `std::offload`, which might also be of interest.
edit: oh, automatic differentiation?
Continuing from this discussion [0], this only makes it a Rust or a CUDA problem rather than a Python, CUDA and a PyTorch one if there bug in one of them.
Yet at the end of the day, it still uses Nvidia's closed source CUDA compiler 'nvcc' which they will never open source. A least Mojo promises to open source their own compiler which compiles to different accelerators with multiple backend support.
Unlike this...but uses Rust.
[0] https://news.ycombinator.com/item?id=48067228
Also Linux support for CUDA on laptops, especially with dual GPU setup isn't particularly great.
Most workstation class laptops are Windows based.
Could maybe be forked with some dynamic smarts, HIP is basically 1:1 with CUDA: https://github.com/amd/amd-lab-notes/blob/release/hipify%2Fs...
Otherwise it isn't 1:1 with CUDA, and I am not counting everything else on CUDA ecosystem
Fortran: https://github.com/ROCm/hipfort
Python (not sure about JIT): https://rocm.docs.amd.com/projects/hip-python/en/latest/
Those people probably did not buy an Nvidia GPU for themselves. It should be common knowledge that the "Open" Nvidia drivers still run gigantic firmware blobs to dispatch complex workloads. And Nouveau is close to useless for GPGPU compute.
1) Higher level code is easier for LLMs to review and iterate upon. The more the intent is clear from the code, the easier it is for humans and LLMs to work with.
2) LLMs get stuck or fail to solve a problem sometimes. It is preferable to have artifacts that humans can grok without the massive extra effort of parsing out assembly code.
3) Assembly code varies massively across targets. We want provable, deterministic transformation from the intent (specified in a higher level language) to the target assembly language. LLMs can't reliably output many artifacts for different platforms that behave the same.
4) Hopefully, we are still reviewing the code output by LLMs to some extent.
The counter-argument, and one that matches my experience is working at a lower level is actually beneficial for LLMs since they can see the whole picture and don’t have to guess at abstractions.
A very big practical reason is also that assembler code would eat context like no other.
1.5) Having a compiler in the loop that does things like enforcing type constraints (and in the case if Rust in particular, therefore memory safety guarantees) is really useful both for humans and LLMs.
It’s just a matter of different workflows for different users and application.
Programming languages are tools for thinking. It's not clear that assembly code has the right abstractions to encourage the kind of thinking that programming large systems requires. After all, human intelligence found assembly insufficient and went on to invent better languages for thinking, why should artificial intelligence, trained on human intelligence, be any different? Maybe AI in the future will have its own languages for thinking, but assembly is likely not that.